|
|
Gas Alarm Systems (a div of ALVI Technologies P/L) is pleased to launch GAS-CO2-00X-K Infra-Red CO2 Duct Probe Transmitter. |
|
|
|
The intelligent LRS 01 Smoke Switch offers reliable and early detection of smoke in ventilation ducts, to achieve the necessary control for the desired ventilation system components, e.g. fire and smoke dampers. |
|
|
|
A combination of indicating and switching
instrument for pressure, differential pressure and partial vacuum.
Pressure chamber and measuring diaphragm
are available in different materials to meet various requirements. |
|
|
|
Adjustable air differential pressure switch for monitoring of over pressure, vacuum, differential pressure of air or other non-combustible, non-aggressive gases. |
|
|
|
Very Early Fire Detection and Safety Alarm (VEFSA) is designed for monitoring products of combustion gases (CO) for very early fire detection. First trace of early fire is gas radicals which is picked up by VEFSA - smoke detection is too late. |
|
|
|
Carbon Dioxide Monitor and Alarms provide real time carbon dioxide detection and monitoring. |
|
|
|
The differential pressure switch type DS34 is suitable for all non aggressive gases and fluids, as they are: service water, heating water, neutral gas, oil, oily water. |
|
|
|
Water Differential Measuring Transmitter for overpressure, partial vacuum and differential pressure of liquid and aerial media. It's also suitable for various measuring applications in the field of industrial and sanitary techniques. |
|
|
|
This pressure transmitter with ceramic gauge head is suitable for accurate measurement of positive / negative gauge pressure in hazardous areas.
The units meet demands for type of protection ’’EEx ib IIC T6“. |
|
|
|
MSR Germany MGC-03 is 1-2 Channel Gas Controller for toxic, explosive, refrigerant gases with 4-2 mA output. It has display, keypad, auto-diagnostic watchdog, fail safe with built in buzzer. There are 2 x SPDT relays with 4x LEDs Alarm, Fault, power |
|
|
|
MSR CO / NO2 sensors can be used in car park to control ventilation fans and save green house and ENERGY as per AS1668.2. They give 4-20 mA or 0-10 V output for BMS or for MSR MGC Gas Controllers. Plug-in sensor /pcb for easy service. GEL type cell |
|
|
|
MSR Germany PolyXeta are ATEX certified Exd Ex-Proof Transmitters for hazardous area Zone 1, 2 for monitoring of host of toxic, flammable gases. They come in display, non-display models with 10 BIT microprocessor for drift tracking. Output is 4-20 mA |
|
|
|
Gas Alarm CO2 Transmitter is used for monitoring CO2 in the range of 0-2000 ppm. It uses self-calibrating dual beam gold plated Infra-Red Sensor. Use wall mount or duct mount models and control fresh air intake fan at 1000 ppm CO2 for Energy saving |
|
|
|
MSR Germany PolyGard Infra-Red Gas Analysers for carbon dioxide and methane. They continuously monitor for CO2 or CH4 in the range of 0 - 100% Vol and gives 4-20 mA output to PLC or for MSR Gas Contl. The sensor is based Dual Beam Infra-Red (NDIR). |
|
|
|
MSR Germany CO2 Cellar Alarm meets the AS 5034 beverage standards for CO2 and O2 Monitoring for OH&S. It comes with self-calibrating maintenance free CO2 sensor, 0 5 % Vol. Display, keypad, auto-diagnostics with 2 x Relays in MGC-03 Controller |
|
|
|
SPC-03 Stand Alone Gas Monitoring with integral sensor. For Toxic, Combustible, Refrigerant Gases. Display, keypad, buzzer, 2 x Alarm LEDs, Fault LED, Power ON LED, 1 x 4-20 mA or Volt output, 2 x SPDT Relays, 24 V DC operation (Option 240 VAC) |
|
|
|
MSR Germany Refrigerant Leak Detector is designed to continuously monitor for R134a Refrigerant in 0-2000 ppm range with 4-20 mA output, 24V DC. It works on solid state Tin Oxide sensing technology. It is housed in ATEX hazardous Exd Ex-Proof housing |
|
|
|
Green House CO2 Detector monitors CO2 in the range of 0 - 5 % Vol in addition monitors Temperature and Relative Humidity. It has built in relays for fan control or generating alarm. Works on 24 V DC (option 240 VAC). CO2 sensor is self-calibrating IR |
|
|
|
Self-Calibrating, Maintenance Free, Dual Beam, Gold Plated Infra-Red Detector, Range: 0 - 5% Vol CO2. It has an ABC feature here the micro-computer self calibrates based on background CO2 levels. No need to spend 100s of Dollars for calibration gases |
|
